Evertz 500DA2Q-HD HD/SD Dual Reclocking Distribution Amplifier (2 - 1 x 4)
$125.00
Make:Evertz
Model:500DA2Q-HD
SKU#5013
Add to Cart Add Make an Offer Offer
Functional:
Fully Functional
Cosmetic:
Very Good
UPS Ground
2 - 5 days (most US locations)
$15.00
UPS Expedited/Express
Cost varies (For International Locations)
Local pickup from store
Plus sales tax of 6% (PA State)
$0.00
$7.50

For sale is ONE (1) used dual SD/HD DA card for 500FR (frame not included). Excellent condition. We have a few units for sale (1 per listing price). This is one of them. All others are in same condition. Serial numbers are unique to each unit sold and may be different from one depicted in the photos - we record all serial numbers of all items shipped. If you are looking for any other Evertz modular cards - we probably have them. Thousands of cards available. Check out our inventory.

The Evertz 500DA2Q-HD Dual HD Reclocking Distribution Amplifier provides the highest density DA in the industry allowing up to 32 HD or SDI Distribution amplifiers in a 3RU rack space. It provides inexpensive distribution of your SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (143 to 360Mb/s), SMPTE ST 344 (540Mb/s), DVB-ASI or SMPTE ST 310 (19.4Mb/s) or any other SDI signal within the 143Mb/s to 1.5Gb/s range.

The 500DA2Q-HD features two auto-equalized inputs and can be configured either as a single DA with eight reclocked outputs or as two separate DAs with four outputs each. In the case of dual operation, each DA can be individually set via jumpers for either reclocking or non-reclocking.

The 500DA2Q-HD is housed in the 500FR exponent frame (not included) that will hold up to 16 modules.

  • Normal mode for SMPTE ST 292-1 (1.5Gb/s) SMPTE ST 259 (143 to 360Mb/s) or SMPTE ST 344 (540Mb/s) signals - autodetects correct bit rate
  • Jumper selectable mode for DVB-ASI
  • Jumper selectable non-reclock mode for SMPTE ST 310(19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
  • Configurable as 1 DA with 8 outputs or 2 DAs with 4 outputs each
  • Fully hot-swappable from front of frame with no BNC disconnect required
  • Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
  • Module health and 2x4 Mode Status LEDs
  • Reclocker(s) Locked, Carrier Present and Video Standard LEDs for each DA channel
  • Tally output on Frame Status bus upon loss of input signal
  • 2x4 mode operation
  • SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (143 to 360Mb/s), SMPTE ST 344 (540Mb/s), DVB-ASI or SMPTE ST 310(19.4Mb/s)
  • Auto equalization to 100m Input A, 90m Input B (Belden 1694A) @ 1.5Gb/s

You May Also Like

Account MENU
0 $0.00
Top